Chainsaw
Stihl MS 441
2-Stroke
The Stihl MS 441 is a 70.7cc 2-stroke professional chainsaw for high-production logging, timber framing, and heavy land clearing, accepting 20" to 28" guide bars. It runs a Walbro carburetor and features a large-volume air filter and side-access chain tensioner. Under production logging conditions, fuel system components require attention every 50–100 hours. A sharp chain at this power level is both a safety requirement and an efficiency necessity — dull chains cause excessive fuel consumption and accelerated bar wear.
Stihl MS 441 quick specs
- Equipment
- Chainsaw · 2-Stroke
- Covered Parts
- Spark Plug, Air Filter, Fuel Filter, Carburetor, Recoil Starter, Ignition Coil, Primer Bulb, Fuel Line Kit, Chain, Guide Bar
- OEM References
- 0000 400 7000, 0000 140 4402, 0000 350 3518, 1138 120 0614, 1138 080 1802, 1138 400 1300, 4238 350 6201, 1138 358 7705
- Model Family
- MS 441, MS 461
- Last Reviewed
- Not yet independently reviewed
- Data Confidence
- Not yet independently reviewed
- Sources Consulted
- Evidence source not recorded
Quick Fitment
| Part Type | OEM / Spec | Common Option | Confidence |
|---|---|---|---|
| Spark Plug | 0000 400 7000 | NGK BPMR7A | Confidence not assigned · Not yet independently reviewed |
| Air Filter | 0000 140 4402 | Stens 605-672 | Confidence not assigned · Not yet independently reviewed |
| Fuel Filter | 0000 350 3518 | OEM 0000 350 3518 | Confidence not assigned · Not yet independently reviewed |
| Carburetor | 1138 120 0614 | Walbro WJ-68 | Confidence not assigned · Not yet independently reviewed |
| Primer Bulb | 4238 350 6201 | Zama BG-00-4 | Confidence not assigned · Not yet independently reviewed |
| Recoil Starter | 1138 080 1802 | Stens 150-752 | Confidence not assigned · Not yet independently reviewed |
| Ignition Coil | 1138 400 1300 | OEM 1138 400 1300 | Confidence not assigned · Not yet independently reviewed |
| Fuel Line Kit | 1138 358 7705 | Stens 115-128 | Confidence not assigned · Not yet independently reviewed |
Tune-Up Kit
Common service bundle: spark plug, air filter, fuel filter, carburetor, primer bulb, fuel line kit.
Maintenance Interval
Inspect filters and fuel lines each season, replace spark plugs during annual service, and service carb/fuel-system parts when starting or idle symptoms appear.
Before You Buy
- Confirm the full model is Stihl MS 441, not just the family name.
- Check serial number, production date, and regional variant before ordering.
- Match the old OEM number stamped on the removed part when available.
- Compare dimensions, plug gap, thread, fuel line diameter, or chain pitch/gauge where applicable.
Common Mistakes
- Ordering from a family listing without checking the exact sub-model.
- Buying a kit that includes the headline part but wrong gaskets, lines, or bulb size.
- Choosing the wrong carburetor revision when multiple versions were used.
- Assuming all fuel line kits use the same diameter and routing.
- Installing the correct plug number with the wrong gap.
- Matching bar length but missing pitch, gauge, or drive-link count.
Symptoms Map
Won't start
Spark plug, fuel filter, primer bulb, carburetor
Starts then dies
Fuel filter, fuel line kit, carburetor
Bogs under throttle
Air filter, carburetor, spark plug gap
Primer will not fill
Primer bulb, fuel line routing, in-tank filter
Cuts slowly
Chain pitch/gauge, bar wear, drive links
Replacement Options
Best OEM equivalent
Start with OEM references 0000 400 7000, 0000 140 4402, 0000 350 3518, 1138 120 0614 and match the removed part before choosing a listing.
Common aftermarket option
Cross-check aftermarket listings such as NGK BPMR7A (spark plug), Stens 605-672 (air filter), Walbro WJ-68 (carburetor) against the OEM number and dimensions.
Best for annual tune-up
Bundle spark plug, air filter, fuel filter when servicing the Stihl MS 441 at the start of the season.
Best if replacing fuel system
Compare the fuel filter, carburetor, primer bulb, fuel line kit together so line routing, bulb size, filter style, and carburetor connections match.
Best chain/bar combo
Match chain specs together, especially pitch, gauge, drive links, and bar mount details.
Best budget kit
Use kit listings only when every included part matches this model page; cheap kits often mix correct headline parts with wrong bulbs, lines, or gaskets.
FAQ
Should I buy OEM or aftermarket parts for the Stihl MS 441? Use OEM when the part controls fuel metering, ignition, or safety. Aftermarket kits can be useful for routine filters, bulbs, plugs, and tune-up bundles when the OEM number and dimensions match.
How do I avoid ordering the wrong carburetor for the MS 441? Match the carburetor number stamped on the removed unit, then compare linkage, choke setup, primer routing, gasket stack, and fuel-inlet direction.
What should I check before replacing fuel-system parts? Photograph the old fuel-line routing, match line diameter and filter style, and compare primer bulb size before buying a kit.
What chain details matter besides bar length? Match pitch, gauge, and drive-link count against the bar stamp, old chain, and drive sprocket. Bar length alone is not enough.
Spark Plug
- Reviewed
- Not yet independently reviewed
- Dimensions
- 0.5mm gap
Air Filter
- Reviewed
- Not yet independently reviewed
- Variant notes
- HD2 heavy-duty filter; also fits MS 441 C-M, MS 461, MS 660
| Brand | Part # | |
|---|---|---|
| Stens | 605-672 | Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying. |
Fuel Filter
- Reviewed
- Not yet independently reviewed
- Variant notes
- Orange in-tank pickup body fuel filter
| Brand | Part # | |
|---|---|---|
| No aftermarket listing is published for this part yet. Use the OEM reference and verify with a dealer or service manual before ordering. | ||
Carburetor
- Reviewed
- Not yet independently reviewed
- Variant notes
- Walbro WJ-68
| Brand | Part # | |
|---|---|---|
| Walbro | WJ-68 | Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying. |
Recoil Starter
- Reviewed
- Not yet independently reviewed
- Variant notes
- Also fits MS 461
| Brand | Part # | |
|---|---|---|
| Stens | 150-752 | Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying. |
Ignition Coil
- Reviewed
- Not yet independently reviewed
- Variant notes
- Also fits MS 461
| Brand | Part # | |
|---|---|---|
| No aftermarket listing is published for this part yet. Use the OEM reference and verify with a dealer or service manual before ordering. | ||
Primer Bulb
- Reviewed
- Not yet independently reviewed
- Variant notes
- Newer units (SN# 287332321+) use 0000 350 6202
Fuel Line Kit
- Reviewed
- Not yet independently reviewed
- Variant notes
- Includes fuel pickup line and return line
| Brand | Part # | |
|---|---|---|
| Stens | 115-128 | Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying. |
Chain
- Reviewed
- Not yet independently reviewed
- Dimensions
- 20", 3/8" pitch, .050" gauge, 72 drive links
- Variant notes
- Stock bar length; verify drive link count matches your bar
| Brand | Part # | |
|---|---|---|
| Oregon | 72LPX072G | Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying. |
Guide Bar
- Reviewed
- Not yet independently reviewed
- Dimensions
- 20", 3/8" pitch, .050" gauge
| Brand | Part # | |
|---|---|---|
| Oregon | 200VXLHD025 | Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying. |