WhichPartFits.com

Chainsaw

Stihl MS 250

2-Stroke · Also known as: 025

The Stihl MS 250 is a 45.4cc 2-stroke chainsaw and the top model in Stihl's homeowner trio alongside the MS 210 and MS 230. It handles 16" to 18" guide bars and excels at regular firewood production and clearing of medium-diameter trees. The MS 250 shares its Zama C1Q-S112 carburetor with the MS 210 and MS 230 — one rebuild kit covers all three. A documented quirk: primer bulbs on units below serial number 287332321 use OEM 4238 350 6201; later units use OEM 0000 350 6202. The MS 250 superseded the Stihl 025.

Verify before ordering: Fitment can vary by serial number, production date, region, and sub-model. Match the OEM number and physical dimensions before ordering.

Stihl MS 250 quick specs

Equipment
Chainsaw · 2-Stroke
Covered Parts
Spark Plug, Air Filter, Fuel Filter, Carburetor, Recoil Starter, Ignition Coil, Primer Bulb, Fuel Line Kit, Chain, Guide Bar
OEM References
0000 400 7000, 1123 120 1613, 0000 350 3500, 1123 120 0600, 1123 080 1802, 1123 400 1201, 4238 350 6201, 1123 358 7701
Model Family
MS 210, MS 230, MS 250, MS 251
Last Reviewed
2026-05-21
Data Confidence
Aftermarket-confirmed
Sources Consulted
Stihl MS 250 parts references, Aftermarket catalog cross-references, Retailer fitment listings
See also: MS 210, MS 230, MS 251 — parts are often interchangeable within this family.

Quick Fitment

Part TypeOEM / SpecCommon OptionConfidence
Spark Plug0000 400 7000NGK BPMR7AMedium · 2026-05-21
Air Filter1123 120 1613Stens 605-687Medium · 2026-05-21
Fuel Filter0000 350 3500OEM 0000 350 3500Low · 2026-05-21
Carburetor1123 120 0600Zama C1Q-S112Medium · 2026-05-21
Primer Bulb4238 350 6201Zama BG-00-4Medium · 2026-05-21
Recoil Starter1123 080 1802Stens 150-568Medium · 2026-05-21
Ignition Coil1123 400 1201Stens 610-879Medium · 2026-05-21
Fuel Line Kit1123 358 7701Stens 115-128Medium · 2026-05-21

Tune-Up Kit

Common service bundle: spark plug, air filter, fuel filter, carburetor, primer bulb, fuel line kit.

Maintenance Interval

Inspect filters and fuel lines each season, replace spark plugs during annual service, and service carb/fuel-system parts when starting or idle symptoms appear.

Before You Buy

  • Confirm the full model is Stihl MS 250, not just the family name.
  • Check serial number, production date, and regional variant before ordering.
  • Match the old OEM number stamped on the removed part when available.
  • Compare dimensions, plug gap, thread, fuel line diameter, or chain pitch/gauge where applicable.

Common Mistakes

  • Ordering from a family listing without checking the exact sub-model.
  • Buying a kit that includes the headline part but wrong gaskets, lines, or bulb size.
  • Choosing the wrong carburetor revision when multiple versions were used.
  • Assuming all fuel line kits use the same diameter and routing.
  • Installing the correct plug number with the wrong gap.
  • Matching bar length but missing pitch, gauge, or drive-link count.

Symptoms Map

Won't start

Spark plug, fuel filter, primer bulb, carburetor

Starts then dies

Fuel filter, fuel line kit, carburetor

Bogs under throttle

Air filter, carburetor, spark plug gap

Primer will not fill

Primer bulb, fuel line routing, in-tank filter

Cuts slowly

Chain pitch/gauge, bar wear, drive links

Replacement Options

Best OEM equivalent

Start with OEM references 0000 400 7000, 1123 120 1613, 0000 350 3500, 1123 120 0600 and match the removed part before choosing a listing.

Common aftermarket option

Cross-check aftermarket listings such as NGK BPMR7A (spark plug), Stens 605-687 (air filter), Zama C1Q-S112 (carburetor) against the OEM number and dimensions.

Best for annual tune-up

Bundle spark plug, air filter, fuel filter when servicing the Stihl MS 250 at the start of the season.

Best if replacing fuel system

Compare the fuel filter, carburetor, primer bulb, fuel line kit together so line routing, bulb size, filter style, and carburetor connections match.

Best chain/bar combo

Match chain specs together, especially pitch, gauge, drive links, and bar mount details.

Best budget kit

Use kit listings only when every included part matches this model page; cheap kits often mix correct headline parts with wrong bulbs, lines, or gaskets.

FAQ

Does this fit MS 210 or MS 230? Parts may interchange with MS 210, MS 230, MS 251, but verify the serial range, OEM number, and physical part details before ordering.

Should I buy OEM or aftermarket parts for the Stihl MS 250? Use OEM when the part controls fuel metering, ignition, or safety. Aftermarket kits can be useful for routine filters, bulbs, plugs, and tune-up bundles when the OEM number and dimensions match.

How do I avoid ordering the wrong carburetor for the MS 250? Match the carburetor number stamped on the removed unit, then compare linkage, choke setup, primer routing, gasket stack, and fuel-inlet direction.

What should I check before replacing fuel-system parts? Photograph the old fuel-line routing, match line diameter and filter style, and compare primer bulb size before buying a kit.

What chain details matter besides bar length? Match pitch, gauge, and drive-link count against the bar stamp, old chain, and drive sprocket. Bar length alone is not enough.

Related Repair Guides

Spark Plug

OEM0000 400 7000Confidence: Medium · Source: Aftermarket catalog
Reviewed
2026-05-21
Dimensions
0.5mm gap
Variant notes
Verify the removed part number and physical fit before ordering.
BrandPart #
NGKBPMR7A

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

ChampionRCJ6Y

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Air Filter

OEM1123 120 1613Confidence: Medium · Source: Aftermarket catalog
Reviewed
2026-05-21
Variant notes
Fits 021, 023, 025, MS210, MS230, MS250
BrandPart #
Stens605-687

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Fuel Filter

OEM0000 350 3500Confidence: Low · Source: Aftermarket catalog
Reviewed
2026-05-21
Variant notes
In-tank pickup body fuel filter
BrandPart #
No aftermarket listing is published for this part yet. Use the OEM reference and verify with a dealer or service manual before ordering.

Carburetor

OEM1123 120 0600Confidence: Medium · Source: Aftermarket catalog
Reviewed
2026-05-21
Variant notes
Zama C1Q-S112; fits MS 210, MS 230, MS 250
BrandPart #
ZamaC1Q-S112

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Recoil Starter

OEM1123 080 1802Confidence: Medium · Source: Aftermarket catalog
Reviewed
2026-05-21
Variant notes
Fits MS 210, MS 230, MS 250
BrandPart #
Stens150-568

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Ignition Coil

OEM1123 400 1201Confidence: Medium · Source: Aftermarket catalog
Reviewed
2026-05-21
Variant notes
Fits MS 210, MS 230, MS 250
BrandPart #
Stens610-879

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Primer Bulb

OEM4238 350 6201Confidence: Medium · Source: Aftermarket catalog
Reviewed
2026-05-21
Variant notes
Newer units (SN# 287332321+) use 0000 350 6202
BrandPart #
ZamaBG-00-4

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

HipaG002-H

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Fuel Line Kit

OEM1123 358 7701Confidence: Medium · Source: Aftermarket catalog
Reviewed
2026-05-21
Variant notes
Includes fuel pickup line and return line; fits 021, 023, 025, MS210, MS230, MS250
BrandPart #
Stens115-128

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Chain

OEMSpec-based fitmentConfidence: Low · Source: Inferred
Reviewed
2026-05-21
Dimensions
18 inch, .325 inch pitch, .063 inch gauge, 68 drive links
Variant notes
Stock bar length; verify drive link count matches your bar
BrandPart #
Oregon22LPX068G

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.

Guide Bar

OEMSpec-based fitmentConfidence: Low · Source: Inferred
Reviewed
2026-05-21
Dimensions
18 inch, .325 inch pitch, .063 inch gauge
Variant notes
Spec-based fitment; confirm dimensions on the existing bar or part.
BrandPart #
Oregon183PXLBA074

Some links may be affiliate links. Match the OEM number, dimensions, and model variant before buying.