Backpack Blower
Stihl BR 600
2-Stroke
The Stihl BR 600 is a 64.8cc 2-stroke professional backpack blower and the top model in Stihl's commercial BR range, producing the highest air volume and velocity of the series. Suited for large commercial properties, golf courses, and production landscaping in dense-leaf environments. The BR 600 runs a Zama carburetor and features a high-capacity air filtration system for extended service intervals in dusty conditions. Fuel system components (filter, primer bulb, fuel lines) are the primary consumables under heavy daily use. The professional lumbar-support harness is designed for full-shift wear.
Stihl BR 600 quick specs
- Equipment
- Backpack Blower · 2-Stroke
- Covered Parts
- Spark Plug, Air Filter, Fuel Filter, Carburetor, Recoil Starter, Ignition Coil, Primer Bulb, Fuel Line Kit
- OEM References
- 0000 400 7011, 4282 141 0300, 4282 007 3600, 4282 120 0609, 4282 080 3401, 4282 400 1300, 1130 350 6200, 4282 007 1014
- Model Family
- BR 500, BR 550, BR 600
- Data Confidence
- Not yet independently reviewed
Quick Fitment
- Spark PlugOEM / Spec: 0000 400 7011NGK CMR6HSearch Amazon →Affiliate link
- Air FilterOEM / Spec: 4282 141 0300Stens 605-599Search Amazon →Affiliate link
- Fuel FilterOEM / Spec: 4282 007 3600OEM 4282 007 3600Search Amazon →Affiliate link
- CarburetorOEM / Spec: 4282 120 0609Zama C1Q-S237Search Amazon →Affiliate link
- Primer BulbOEM / Spec: 1130 350 6200Zama 0057004Search Amazon →Affiliate link
- Recoil StarterOEM / Spec: 4282 080 3401Stens 150-737Search Amazon →Affiliate link
- Ignition CoilOEM / Spec: 4282 400 1300OEM 4282 400 1300Search Amazon →Affiliate link
- Fuel Line KitOEM / Spec: 4282 007 1014Hipa 4282-007-1014Search Amazon →Affiliate link
As an Amazon Associate, WhichPartFits earns from qualifying purchases.
Tune-Up Kit
Common service bundle: spark plug, air filter, fuel filter, carburetor, primer bulb, fuel line kit.
Maintenance Interval
Inspect filters and fuel lines each season, replace spark plugs during annual service, and service carb/fuel-system parts when starting or idle symptoms appear.
Before You Buy
- Confirm the full model is Stihl BR 600, not just the family name.
- Check serial number, production date, and regional variant before ordering.
- Match the old OEM number stamped on the removed part when available.
- Compare dimensions, plug gap, thread, fuel line diameter, or chain pitch/gauge where applicable.
Common Mistakes
- Ordering from a family listing without checking the exact sub-model.
- Buying a kit that includes the headline part but wrong gaskets, lines, or bulb size.
- Choosing the wrong carburetor revision when multiple versions were used.
- Assuming all fuel line kits use the same diameter and routing.
- Installing the correct plug number with the wrong gap.
Symptoms Map
Won't start
Spark plug, fuel filter, primer bulb, carburetor
Starts then dies
Fuel filter, fuel line kit, carburetor
Bogs under throttle
Air filter, carburetor, spark plug gap
Primer will not fill
Primer bulb, fuel line routing, in-tank filter
Replacement Options
Best OEM equivalent
Start with OEM references 0000 400 7011, 4282 141 0300, 4282 007 3600, 4282 120 0609 and match the removed part before choosing a listing.
Named part options
Cross-check named parts such as NGK CMR6H (spark plug), Stens 605-599 (air filter), Zama C1Q-S237 (carburetor) against the OEM number, identity label, and dimensions.
Best for annual tune-up
Bundle spark plug, air filter, fuel filter when servicing the Stihl BR 600 at the start of the season.
Best if replacing fuel system
Compare the fuel filter, carburetor, primer bulb, fuel line kit together so line routing, bulb size, filter style, and carburetor connections match.
Best budget kit
Use kit listings only when every included part matches this model page; cheap kits often mix correct headline parts with wrong bulbs, lines, or gaskets.
FAQ
Should I buy OEM or aftermarket parts for the Stihl BR 600? Use OEM when the part controls fuel metering, ignition, or safety. Aftermarket kits can be useful for routine filters, bulbs, plugs, and tune-up bundles when the OEM number and dimensions match.
How do I avoid ordering the wrong carburetor for the BR 600? Match the carburetor number stamped on the removed unit, then compare linkage, choke setup, primer routing, gasket stack, and fuel-inlet direction.
What should I check before replacing fuel-system parts? Photograph the old fuel-line routing, match line diameter and filter style, and compare primer bulb size before buying a kit.
As an Amazon Associate, WhichPartFits earns from qualifying purchases. Match the OEM number, dimensions, and model variant before buying.
Spark Plug
- Dimensions
- 0.7mm gap
Air Filter
- Variant notes
- Also fits BR 500, BR 550
- Stens605-599
Fuel Filter
- Variant notes
- Dual-port pickup body assembly — different from chainsaw fuel filter
- No named part listing is published for this part yet. Use the OEM reference and verify with a dealer or service manual before ordering.
Carburetor
- Variant notes
- Zama C1Q-S237; different from BR 500/550
- ZamaC1Q-S237
Recoil Starter
- Variant notes
- Fits BR 500, BR 550, BR 600
- Stens150-737
Ignition Coil
- Variant notes
- Fits BR 500, BR 550, BR 600
- No named part listing is published for this part yet. Use the OEM reference and verify with a dealer or service manual before ordering.
Primer Bulb
- Variant notes
- Fits BR 500, BR 550, BR 600
- Zama0057004
- Hipa1130-350-6200
Fuel Line Kit
- Variant notes
- Includes fuel pickup line and return line; fits BR 500, BR 550, BR 600
- Hipa4282-007-1014